Description

This product is a WIFI fire UV flame detector that detecting the ultraviolet rays generated by the burning substance. It makes sound with flashing on the spot and push message to user APP at same time as soon as there is a fire occurring. It can detect the small flame even in far distance, which can prevent the fire accident effectively in the beginning stage. It is suitable for places that are prone to have visible flames and have strong flame radiation or no smoldering stage in the event of the fire.  
It is widely apply to petrol station, chemical plant, train, warehouse, hotel, office, home etc.

Both ultraviolet flame detector and smoke detector are for fire security protection. Why choose the KONLEN WIFI flame detector? What difference are they?

The traditional smoke detectors are designed for detecting dust particles of smoke, can’t detect fire flame. It can’t be triggered an alarming if no enough smoke go into the inlet of detector and cycling inside for a certain time. Based on the working principle, usually they have to be installed on the ceiling,and in a sealed space to make sure have enough smoke concentration enter into the detector inlet. Maybe the house have been burnt for a while by a big fire when receive a smoke alarm alert. So smoke detectors are difficult to make the early warning effectively in the initial stage of an fire accident.

The new generation ultraviolet flame detector can detect a small flame from a lighter in about 3 to 5 meters, can detector a small flame burnt by two A4 paper at same time in about 10 meters, bigger fire flame can reach to 30 meter, which can response and report the fire accident quickly and timely, prevent the fire accident, more effectively in the initial stage.

Multi-way installation

Can install on the side wall or ceiling, can install in the sealed space or in open area. Of course side wall installation within 1.5 to 3 meters height is best option, which can reach the biggest detection angle and distance.

Some fuel petrol burning can’t produce smoke or only produce a little smoke.The smoke detector in these occasions is almost useless. So the KONLEN ultraviolet flame detector will very fit for installing in the petrol station, fuel factory, chemical plants etc.

1. Detect flame,

2. sound and flash alarm on the spot,

3. Push notification to Tuya Smart or Smart Life App.

Specification:

Working voltage: 5V 1A

Rated power: 0.2W

Detection distance: >10 meters (10cm*10cm area visible flame)

Installation height of side wall: 1.5m – 3m recommended

Normal working: The red LED flashes every 7seconds.

Alarm indication: red led always on

Operating humidity: up to 95% (no condensation)

Spectral response range: 180nm~ 290nm

Dimension: 130mm*59mm*67mm

App: Tuya Smart or Smart Life

Before usage please add the KONLEN flame detector to the App via WIFI configuration.